List of LTT/NTUA publications on Gas Turbine Performance Modelling

 

  1. Mathioudakis K., Aretakis N., Alexiou A. (2024). "Determining Steady-State Operation Criteria Using Transient Performance Modelling and Steady-State Diagnostics. Appl. Sci. 2024, 14, 2863. https://doi.org/10.3390/app14072863. [abstract]

  2. Villette S, Adam D, Alexiou A, Aretakis N, Mathioudakis K. (2024). "A Simplified Chemical Reactor Network Approach for Aeroengine Combustion Chamber Modeling and Preliminary Design. Aerospace. 2024; 11(1):22. (The paper has been selected as the journal issue cover). https://doi.org/10.3390/aerospace11010022. [abstract]

  3. Alexiou A, Kolias I, Aretakis N, Mathioudakis K. (2023). "Aero-Engine Preliminary Design Optimization and Operability Studies Supported by a Compressor Mean-Line Design Module. Aerospace. 2023; 10(8):726. https://doi.org/10.3390/aerospace10080726 [abstract]

  4. Kolias, I.; Aretakis, N.; Alexiou, A.; Mathioudakis, K. (2023). "A Tool for the Design of Turbomachinery Disks for an Aero-Engine Preliminary Design Framework. Aerospace 2023, 10, 460. https://doi.org/10.3390/aerospace10050460 [abstract]

  5. Ntonas, K., Aretakis, N., Koskoletos, O., Mathioudakis, K. (2022). "1D multi-point marine turbocharger design, for optimal performance recovery". Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. https://doi.org/10.1177/09576509221100177 [abstract]

  6. Ntonas, K., Aretakis, N., Mathioudakis, K. (2021). "A Marine Turbocharger Compressor Multi-Point 3D Design Optimization Tool". ASME paper GT2021-59518. [abstract][Presentation]

  7. Kolias, I., Alexiou, A., Aretakis, N., Mathioudakis, K. (2021). "Axial Compressor Mean-Line Analysis: Choking Modelling and Fully-Coupled Integration in Engine Performance Simulations." International Journal of Turbomachinery, Propulsion and Power. 2021; 6(1):4 (The paper has been selected as the journal issue cover, and also entered the top 10 most downloaded articles of 2021). https://doi.org/10.3390/ijtpp6010004 [abstract]

  8. Alexiou, A., Aretakis, N., Kolias, I., Mathioudakis, K. (2021). "Novel Aero-Engine Multi-Disciplinary Preliminary Design Optimization Framework Accounting for Dynamic System Operation and Aircraft Mission Performance". Aerospace. 2021; 8(2):49. https://doi.org/10.3390/aerospace8020049 [abstract]

  9. Athanasakos, G., Aretakis, N., Alexiou, A., & Mathioudakis, K. (2020). "Turboelectric Distributed Propulsion Modelling Accounting For Fan Boundary Layer Ingestion And Inlet Distortion" ASME paper GT2020-14621 [abstract][Presentation]

  10. Ntonas, K., Aretakis, N., Roumeliotis, I., & Mathioudakis, K. (2020). "A Marine Turbocharger Retrofitting Platform". Journal of Engineering for Gas Turbines and Power, 142(11). https://doi.org/10.1115/1.4048652, also ASME paper GT2020-14643. [abstract][Presentation]

  11. Rompokos, P., Aretakis, N., Roumeliotis, I., & Mathioudakis, K. (2020). "Application of an Advanced Adaptation Methodology for Gas Turbine Performance Monitoring". GPPS paper GPPS-CH-2020-0092 [abstract][Presentation]

  12. Kalathakis, C., Aretakis, N., Roumeliotis, I., Alexiou, A., & Mathioudakis, K. (2019). "Simulation models for supporting the solar thermal power plant operator". Energy, 167, 1065–1073.; Available at: https://doi.org/10.1016/j.energy.2018.11.041. [abstract]

  13. Kalathakis, C., Aretakis, N., Mathioudakis, K., "Solar Hybrid Micro Gas Turbine Based on Turbocharger" Appl. Syst. Innov. 2018, 1, 27; Available at: http://dx.doi.org/10.3390/asi1030027. [abstract] [Paper]

  14. Kolias I., Alexiou A., Aretakis N., Mathioudakis K., "Direct Integration of Axial Turbomachinery Preliminary Aerodynamic Design Calculations in Engine Performance Component Models" ASME paper GT2018-76494 [abstract] [Presentation]

  15. Alexiou A., Aretakis N., Roumeliotis I., Kolias I., Mathioudakis K., "Performance modelling of an ultra-high bypass ratio geared turbofan" ISABE-2017-22512 [abstract] [Presentation]

  16. Kalathakis, C., Aretakis, N., Roumeliotis, I., Alexiou, A., Mathioudakis, K., "Assessment of Solar Gas Turbine Hybridization Schemes." Journal of Engineering for Gas Turbines and Power, 139(6), p. 61701, 2017. Available at: http://dx.doi.org/10.1115/1.4035289 [abstract]

  17. Kalathakis, C., Aretakis, N., Roumeliotis, I., Alexiou, A., Mathioudakis, K., "Concentrated Solar Power Components Toolbox in an Object Oriented Environment." Simulation Modelling Practice and Theory, vol. 70, pp. 21–35, Jan. 2017. Available at: http://dx.doi.org/10.1016/j.simpat.2016.10.002. [abstract]

  18. Alexiou A., Frantzis C., Aretakis N., Riziotis V., Roumeliotis I., Mathioudakis K., "Contra Rotating Propeller Modelling for Open Rotor Engine Performance Simulations" ASME Paper GT2016-56645 [abstract] [Presentation]

  19. Roumeliotis I., Aretakis N., Alexiou A. "Industrial Gas Turbine Health and Performance Assessment With Field Data" Journal of Engineering for Gas Turbines and Power. Available at: http://dx.doi.org/10.1115/1.4034986, also ASME Paper GT2016-57722 [abstract] [Presentation]

  20. Templalexis I., Alexiou A., Roumeliotis I., Pachidis V., Aretakis N., "Direct Coupling of a Two-Dimensional Fan Model in a Turbofan Engine Performance Simulation" ASME paper GT2016-56617 [abstract] [Presentation]

  21. Kalathakis C., Aretakis N., Roumeliotis I., Alexiou A., Mathioudakis K., "Assessment of Solar Steam Injection in Gas Turbines ", ASME paper GT2016-57272 [abstract] [Presentation]

  22. Kalathakis C., Aretakis N., Roumeliotis I., Alexiou A., Mathioudakis K., "Investigation of Different Solar Hybrid Gas Turbines and Exploitation of Rejected Sun Power", ASME paper GT2016-57700 [abstract] [Presentation]

  23. Roumeliotis I., Alexiou A., Aretakis N., Sieros G., Mathioudakis K., "Development and Integration of Rain Ingestion Effects in Engine Performance Simulations", Journal of Engineering for Gas Turbines and Power, 137(4), Also ASME GT2014-26556 [abstract] [Presentation]

  24. Aretakis N., Roumeliotis I., Alexiou A., Romesis C., Mathioudakis K., "Turbofan Engine Health Assessment From Flight Data", Journal of Engineering for Gas Turbines and Power, 137(4), Also ASME GT2014-26443 [abstract] [Presentation]

  25. Alexiou A., Pons B., Cobas P., Mathioudakis K., Aretakis N., "Helicopter Engine Optimization For Minimum Mission Fuel Burn" , ISABE-2013-1427 [abstract] [Presentation][Paper]

  26. Alexiou A., Roumeliotis I., Aretakis N., Tsalavoutas A., Mathioudakis K., "Modelling Contra-Rotating Turbomachinery Components For Engine Performance Simulations: The Geared Turbofan With Contra-Rotating Core Case" , Journal of Engineering for Gas Turbines and Power, 134(11), (also: ASME paper GT-2012-69433), (Best paper award, of the Cycle Innovations Committee of IGTI / ASME) [abstract] [Presentation]

  27. Alexiou A., Tsalavoutas A., Pons B., Aretakis N., Roumeliotis I., Mathioudakis K., "Assessing Alternative Fuels For Helicopter Operation" , Journal of Engineering for Gas Turbines and Power, 134(11), (also: ASME paper GT-2012-69417) [abstract] [Presentation]

  28. Aretakis N., Roumeliotis I., Mathioudakis K., "Performance Model “Zooming” For In-Depth Component Fault Diagnosis", ASME Journal of Engineering for Gas Turbines and Power, March 2011, Vol. 133, No. 3, 031602-1 (11 pages) [abstract] [Presentation] (also: ASME paper GT2010-23262 )

  29. Alexiou A., Aretakis N., Roumeliotis I., Mathioudakis K., "Short And Long Range Mission Analysis For A Geared Turbofan With Active Core Technologies" , ASME paper GT2010-22701 [abstract] [Presentation]

  30. Roumeliotis I., Aretakis N., Yfantis E., Mathioudakis K., Kapasakis P., "Enhanced Training on Marine Gas Turbine Degradation Effects", ECOS 2010 paper 617 [abstract]

  31. Roumeliotis I., Mathioudakis K., "Evaluation of Water Injection Effect on Compressor and Engine Performance and Operability", Applied Energy, Vol. 87, No. 4, April 2010, pp. 1207-1216 [abstract]

  32. Alexiou A., Mathioudakis K., "Direct-Transfer Pre-Swirl System: Performance Modelling, Validation And Optimisation", 8th European Turbomachinery Conference proceedings, paper 249, March 23-27, 2009, Graz Austria [abstract] [Presentation]

  33. Kelaidis M., Aretakis N., Tsalavoutas A., Mathioudakis K., "Optimal Mission Analysis Accounting For Engine Aging And Emissions", ASME Journal of Engineering for Gas Turbines and Power, Vol. 131, No. 1, January 2009, 011201 (10 pages) [abstract] [Presentation] (also: ASME paper GT2008-50800 )

  34. Alexiou A., Mathioudakis K., "Secondary Air System Component Modelling For Engine Performance Simulations", ASME Journal of Engineering for Gas Turbines and Power, Vol. 131, No. 3, May 2009, 031202 (9 pages) [abstract] [Presentation] (also: ASME paper GT2008-50771 )

  35. Alexiou A., Baalbergen E., Mathioudakis K., Kogenhop O., Arendsen P., "Advanced Capabilities for Gas Turbine Engine Performance Simulations", ASME paper GT2007-27086 [abstract] [Presentation][Paper]

  36. Tsalavoutas A., Kelaidis M., Thoma N., Mathioudakis K., "Correlations Adaptation for Optimal Emissions Prediction", ASME paper GT2007-27060 [abstract] [Presentation]

  37. Mathioudakis K, Aretakis N., Kotsiopoulos P., Yfantis E., "A Virtual Laboratory for Education On Gas Turbine Principles And Operation", ASME paper GT2006-90357 [abstract] [Presentation]

  38. Alexiou A., Mathioudakis K., "Gas Turbine Engine Performance Model Applications Using An Object-Oriented Simulation Tool", ASME paper GT2006-90339 [abstract] [Presentation]

  39. Roumeliotis I., Mathioudakis K., "Analysis of moisture condensation during air expansion in turbines", International Journal of Refrigeration Vol. 29, No. 7, November 2006, pp. 1092-1099 [abstract]

  40. Roumeliotis I., Mathioudakis K., "Water Injection Effects on Compressor Stage Operation", ASME Journal of Engineering for Gas Turbine and Power, Vol. 129, No. 3, pp. 778-798 [abstract] [Presentation] (also: ASME Paper GT2006-90427 )

  41. Stamatis A., Mathioudakis K., "The Influence Of Heat Transfer Effects On Turbine Performance Characteristics", ASME paper GT2006-91039 [abstract] [Presentation]

  42. Roumeliotis I., Mathioudakis K., "Evaluation of Interstage Water Injection Effect on Compressor And Engine Performance", ASME Journal of Engineering for Gas Turbines and Power, Vol. 128, No. 4, October 2006, pp. 849-856 [abstract] [Presentation] (also: ASME Paper GT2005-68698 )

  43. Alexiou A., Mathioudakis K., "Development of Gas Turbine Performance Models Using a Generic Simulation Tool", ASME paper GT2005-68678 [abstract] [Presentation]

  44. Mathioudakis K., "Gas Turbine Test Parameters Corrections Including Operation With Water Injection", ASME Journal of Engineering for Gas Turbine and Power, Vol. 126, No. 2, April 2004, pp. 334-341 [abstract] [Presentation] (also: ASME Paper GT-2002-30466 )

  45. Roumeliotis I., Aretakis N., Mathioudakis K., “Performance Analysis Of Twin-Spool Water Injected Gas Turbines Using Adaptive Modelling”, ASME paper GT2003-38516, ASME Turbo Expo 2003 [abstract] [Presentation]

  46. Mathioudakis K., Argyropoulos P., "Design and Development of a Small Jet Engine Test Cell", ASME paper GT-2003-38315 [abstract] (Best paper award, of the Education Committee of IGTI / ASME)

  47. Doukelis A., Mathioudakis K., "Turbomachinery Flow Measurements Using Long-Nose Probes", ASME Paper GT-2003-38488 [abstract]

  48. Mathioudakis K., "Evaluation of Steam and Water Injection Effects on Gas Turbine Operation Using Explicit Analytical Relations", Proceedings Of The Institution of Mechanical Engineers, PART A, Journal of Power and Energy, Vol 216 No A6, Dec. 2002, pp. 419-431 [abstract]

  49. Mathioudakis K., "Analysis of the Effects of Water Injection on the Performance of a Gas Turbine", ASME Journal of Engineering for Gas Turbines and Power, Vol. 124, No. 3, July 2002, pp 489-495 [abstract]

  50. Stamatis A., Kamboukos Ph., Aretakis N., Mathioudakis K., “On Board Adaptive Models: A General Framework and Implementation Aspects", ASME paper GT-2002-30622, ASME Turbo Expo 2002 [abstract] [Presentation]

  51. Stamatis A., Mathioudakis K., Ruiz J., Curnock B., “Real Time Engine Model Implementation For Adaptive Control & Performance Monitoring of Large Civil Turbofans”, ASME paper 2001-GT-0362, 46th ASME International Gas Turbine & Aeroengine Technical Congress, New Orleans, Louisiana, USA, June 4-7, 2001 [abstract] [Presentation]

  52. Mathioudakis K., Tsalavoutas A., “Effects Of Anti-Icing System Operation On Gas Turbine Performance And Monitoring”, ASME paper 2001-GT-0211, 46th ASME International Gas Turbine & Aeroengine Technical Congress, New Orleans, Louisiana, USA, June 4-7, 2001 [abstract] [Presentation]

  53. Mathioudakis K., Stamatis A., Tsalavoutas A., Aretakis N., “Performance Analysis of Industrial Gas Turbines for Engine Condition Monitoring”, Proceedings Of The Institution of Mechanical Engineers, PART A, Journal of Power and Energy, Vol. 215, No. A2, March 2001, pp. 173-184 [abstract] [Presentation] (also presented at: First International Conference On Engineering Thermophysics, Beijing, China, August 18-21, 1999 (ICET '99))

  54. Tsalavoutas A., Pothos S., Mathioudakis K., Stamatis A., "Monitoring the Performance of a Twin-Shaft Ship Propulsion Turbine by Means of Adaptive Modeling", RTO Symposium on Gas Turbine Operation and Technology for Land, Sea and Air Propulsion and Power Systems, Ottawa, Canada, 18-21 October 1999

  55. Sieros G., Stamatis A., Mathioudakis K., “Jet Engine Component Maps for Performance Modelling and Diagnostics”, AIAA Journal of Propulsion and Power, Vol 13, No. 5, September-October 1997, pp. 665-674 [abstract]

  56. Sieros G., Stamatis A., Mathioudakis K., "Analytical Representation of Jet Engine Turbomachinery Components Characteristics for Use in Engine Performance Modelling and Diagnosis", XII ISABE, Melbourne, Australia, Sept 10-15, 1995

  57. Lambiris B., Mathioudakis K., Stamatis A., Papailiou K.D., "Adaptive Modelling of Jet Engine Performance With Application to Condition Monitoring", AIAA Journal of Propulsion and Power, Vol 10, No 6, Nov-Dec 1994, pp. 890-896 [abstract ] (also: Proceedings of the 10th International Symposium on Air Breathing Engines (ISABE), Notingham, UK, Sep. 1991)[

  58. Tsalavoutas A., Stamatis A., Mathioudakis K., "Derivation of Compressor Stage Characteristics, for Accurate Overall Performance Map Prediction", ASME paper 94-GT-372, 39th ASME International Gas Turbine and Aeroengine Congress and Exposition, June 1994, Hague, Netherlands

  59. Stamatis A., Mathioudakis K., Papailiou K.D., 1989a, "Adaptive Simulation of Gas Turbine Performance", ASME Journal of Engineering for Gas Turbine and Power, Vol. 112, No 2, April 1990, pp. 168-175 (also: ASME paper 89-GT-205)

Top of Page